XADO Tuning Atomic metal conditioner Tuning with revitalizant Designed for locally fine tuning (tuning) of engine parts rubbing together to ensure minimum friction and maximum resource.  Innovative 3-component * product of the new generation, combining the advantages of a two-phase complex metal conditioner and revitalizant third generation.   Compensates current wear of the engine  Aligns the compression in the cylinders  Increases the pressure in the oil system to the nominal  Creates an active protection system of parts from loads and overheating  Improves the lubricating properties of the oil and tribological characteristics of engine components  Reduces noise and vibration  Increases engine life  Reduces fuel consumption  It increases power and engine acceleration   RF = 33,3 RF (Revitalization factor) - indicator of the effectiveness of restoration and protection against wear. RF = 33,3 indicates that partial revitalization was the engine. Application Temperature of the composition prior to application should be at least +25 ° C Shake the vial.  Make the contents into the oil hole engine warmed up to operating temperature.  Start the engine and let it idle for 3-5 minutes Notes Metal conditioner with revitalizant effective for gasoline, gas (LPG) and diesel engines of passenger cars and small trucks with oil system from 3 to 5 l Compatible with all types of motor oils For turbo and uprated engines is recommended at every oil change For a complete revitalization of the AMC recommended Maximum (RF 100) * Product contains revitalizant the granules which completely dissolve in the oil at the operating temperature.