Quickly cleans the cooling system Removes scale, rust and dirt Creates a protective anti-corrosion film on the details of the cooling system In operation of the cooling system with its details deposits form over time, which reduces the heat transfer from the engine. For efficient cooling of the engine is recommended washing its cooling system every time you change the coolant. Quickly (10 minutes!) Dissolves fat, dirt and rust that has accumulated in the radiator and cooling system Neutralize the acids formed, protects against corrosion Increases the efficiency of the engine cooling Does not require subsequent neutralization, completely safe to use Neutral with respect to all types of structural materials of the cooling system: alloys (including aluminum), plastic materials and sealants structure Surfaktany, neutral, acid, corrosion inhibitors, additives in water. dosage 250 ml. cleaner at 10-12 liters. coolant. application Warm up the engine to operating temperature, the engine should be warm but not hot. Pour into the tank vehicle radiator with the engine off. Start the engine and let it idle for 10 minutes. when the passenger compartment heating. Rinse the cooling system for this: stop the engine Drain the old coolant Fill the cooling system with water and ensure that the engine at idle for 2-3 minutes Stop the engine and drain the water from the system and refill with new coolant. CAUTION Warm engine antifreeze in the cooling system is under pressure. Be careful when opening the radiator cap, from under it can escape the hot vapor or liquid.